Product information on Ball Valves are all available.
Ball Valve
BF Series [ FLOATING BALL VALVES ]
- ANSI 150 & 300
- Full bore : sizes ½" to 12"
- For pipeline, oilfield or process Industry
- Model BF
- Full Bore
- Floating Ball
- Fire Safe
- Cavity Relief
- ANSI 600
- Full bore : sizes ½" to 6"
- Reduced bore : sizes 3" to 6"
- For oilfield or process Industry
- ANSI 900 & 1500
- Full bore : sizes ½" to 1½"
- For oilfield or process Industry
Bu Series [ FLOATING BALL VALVES ]
- ANSI 150 & 300
- Reduced bore : sizes 1½" to 12"
- For pipeline, oilfield or process Industry
- Model BU
- Uni-Body
- Full Bore
- Floating Ball
- Fire Safe
- Cavity Relief
BT & BTP Series [ TRUNNION MOUNTED BALL VALVES ]
- ANSI 150 & 300
- Full bore : sizes 4" to 52"
- Reduced bore : sizes 6" to 52"
- Applicable Standards : ANSI B16. 34, BS5351, API6D & / or JIS
- Face to face : ANSI B16. 10
- End Flange Demensions: ANSI B16.5
- Model BT & BTP
- Trunnion Mounted
- Full & Reduced
- Fire Safe
- Double Block
- Sealant Injector
- ANSI 600
- Full bore & Reduced bore : sizes 2" to 24"
- Applicable Standards : ANSI B16. 34, BS5351, API6D & / or JIS
- Face to face : ANSI B16. 10
- End Flange Demensions: ANSI B16.5
- ANSI 900 & 1500
- Full bore & Reduced bore : sizes 2" to 24", 2 or 3 pieces
- Applicable Standards : ANSI B16. 34, BS5351, API6D & / or JIS
- Face to face : ANSI B16. 10
- End Flange Demensions: ANSI B16.5
- ANSI 2500
- Full bore & Reduced bore
- Applicable Standards : ANSI B16. 34, API6D
- Face to face : ANSI B16. 10
- End Flange Demensions: ANSI B16.5
B6A Series [ API 6FA-SIDE ENTRY ]
- API 2000, 3000 & 5000
- Full bore : 2 1/16" to 11"
- Through Conduit Full Rpund
- Opening bore conforms to API 6A
- Trunnion Mounted Ball
- Blow-out proof stem
- Flange end to API 6A sect. XA.
3-Way Ball Valves
- Model BN
- ANSI 150, 300 & 600 : 1½" to 10"
- 3-way (90°)
- 4-seat Design
- L ot T port
- Full Bore
- Model BY
- ANSI 150, 300 & 600 : 2" to 12"
- 3-way (120°)
- 3-seat Design
- L port
- Floating/Trunnion
Gate Valves
- ANSI classes 150 to 4,500
- Sizes range : 2" to 48"
- Designed to ASME B16.34 API 600 and API 603
- Tested according to API 598
- Bolted bonnet and Pressure seal designs
- Cast and forged steel
- RF and RJJ flanged, buttweld ends
- Type Approval Certificate form DNV
Other Valves
- Model BFM [ Metalseat Ball Valve ]
- ANSI 150, 300 & 600 : 1½" to 12"
- Floating/Trunnion
- Fire Safe
- Model BFC [ Cryogenic Ball Valve ]
- ANSI 150, 300 & 600 : 1½" to 16"
- Long Bonnet
- Model BP [ Pocketless Ball Valve ]
- ANSI 150, 300 & 600 : 1½" to 10"
- Full Bore
- Model SP [ Special Valve ]
- Sampleing Ball Valve
- Stream Jacketed
- Three attached Ball Valve
- Din Ball Valve
- V-Port Ball Valve
- High cycle Ball Valve
- Extend Stem